Challenges and Opportunities of Geothermal Power in Taiwan: A Comprehensive Analysis of Advantages, Limitations, and Current Development

2026/2/1

In recent years, driven by the global energy transition and the 2050 net-zero emissions target, the Taiwanese government has actively promoted renewable energy strategies to reduce dependence on conventional fossil fuels. Within Taiwan’s highly competitive renewable energy landscape, geothermal power has long remained underdeveloped due to high development thresholds and significant technical challenges.

However, Taiwan’s location along the Pacific Ring of Fire provides inherent geological advantages for geothermal development. In response, the government has gradually introduced supportive policies and development targets, aiming to enhance geothermal energy’s role within the national energy mix.

Against this backdrop, a deeper examination of Taiwan’s geothermal challenges, advantages, current development status, and future opportunities not only helps clarify the broader renewable energy landscape but also reveals tangible pathways for low-carbon energy transition and the application of Organic Rankine Cycle (ORC) systems.

What Is Geothermal Power in Taiwan? A Unique Renewable Energy Advantage for Stable Electricity Supply

1. Geothermal Power as a 24/7 Baseload Renewable Energy Source

One of the most significant advantages of geothermal power is its ability to provide clean, reliable baseload electricity and thermal energy. Unlike solar power, which depends on sunlight, or wind power, which fluctuates with wind conditions, geothermal power generation is largely unaffected by weather, seasons, or diurnal cycles.

2. Small Land Footprint and High Land-Use Efficiency

Compared with other renewable energy technologies, geothermal power plants offer a clear advantage in land-use efficiency. Solar photovoltaic systems typically require extensive land areas for panel installation, while wind farms need adequate spacing between turbines. In contrast, geothermal facilities concentrate most surface infrastructure around wellheads and power generation units, resulting in a much smaller footprint per unit of installed capacity.

This advantage is particularly valuable for Taiwan, where land availability is limited and population density is high. Efficient land use reduces conflicts with agriculture and environmentally sensitive areas, while increasing the feasibility of multi-purpose land utilization.

3. Significant Carbon Reduction Benefits Supporting Energy Transition Goals

Geothermal power utilizes the Earth’s internal heat for electricity generation, resulting in extremely low direct carbon emissions. Compared with coal- or gas-fired power plants, geothermal facilities emit substantially less CO₂ during operation.

As countries worldwide pursue carbon neutrality and net-zero policies, geothermal energy stands out as a low-carbon renewable option. Since no fossil fuel combustion is required, operational emissions are minimal, making geothermal power an effective complement to other renewable energy sources in achieving climate targets.

4. Abundant Geothermal Resource Potential: Taiwan’s Hidden Natural Asset

Taiwan’s unique geological environment provides substantial geothermal potential. Located at the core of the Pacific seismic belt, Taiwan has experienced extensive magmatic activity, resulting in abundant subsurface thermal resources—particularly in regions such as the Tatun Volcano Group, Yilan, and eastern Taiwan.

According to Taiwan’s Bureau of Energy, total geothermal potential is estimated at approximately 40 GW, far exceeding current development levels. This indicates that geothermal energy remains largely untapped, presenting significant opportunities for technology providers, system integrators, and engineering firms.

Challenges of Geothermal Power: Limitations That Must Be Addressed

Despite its advantages in stability and low emissions, geothermal power development faces several challenges. Initial exploration and construction costs are relatively high, including drilling, geological surveys, and power plant installation. These factors create significant upfront investment barriers.

To mitigate early-stage risks, the Taiwanese government has introduced demonstration subsidies and investment mechanisms, such as geothermal power incentives led by the Ministry of Economic Affairs and green growth funding supported by the Ministry of Environment and the National Development Fund.

Current Status and Future Development Trends of Geothermal Power in Taiwan

Although Taiwan possesses abundant geothermal resources, dispersed geological conditions and site locations within mountainous or hot spring protection zones have led to a predominance of small- to medium-scale geothermal projects. From early experimental plants such as Qingshui to commercial sites in Renzhe (Yilan) and Hongye (Taitung), installed capacities typically range from several hundred kilowatts to a few megawatts.

These sites are characterized by moderate-to-high resource temperatures but limited flow rates. As a result, conventional large steam turbines are unsuitable, while traditional small expanders often suffer efficiency losses under partial load and fluctuating operating conditions. This directly constrains power output and increases the need for specialized engineering expertise and customized system design.

Given exploration risks and grid connection challenges, many developers adopt a phased development approach, starting with smaller capacities to reduce initial investment and uncertainty.

In this context, modular power generation systems have emerged as a key design strategy for geothermal projects in Taiwan. Modular configurations shorten construction timelines, reduce on-site assembly requirements, and simplify equipment transportation and installation in remote areas, while preserving flexibility for future expansion.

Nikkiso Radial Inflow Turbine: Designed for Taiwan’s Geothermal Conditions

To address the structural challenges of geothermal development in Taiwan, Nikkiso’s Radial Inflow Turbine offers an optimal core solution for small- and medium-scale geothermal and Organic Rankine Cycle (ORC) systems.

1. High Efficiency for Small and Medium Resources

Unlike conventional small expanders with limited efficiency, Nikkiso’s turbine features variable geometry and adjustable inlet guide vanes, maintaining high efficiency even under partial load and fluctuating flow conditions—ideal for Taiwan’s variable geothermal well characteristics.

2. Modular Capacity to Reduce Development Risk

With capacities ranging from 0.5 MW to 25 MW, units can operate individually or in parallel, fully supporting Taiwan’s phased development and gradual expansion approach, while enhancing investment flexibility.

3. Optimized for Medium-to-High Temperature Heat Sources (80–250°C)

This range aligns precisely with Taiwan’s geothermal resource temperatures, enabling efficient recovery of geothermal and waste heat with superior performance compared to conventional ORC expanders.

4. Reliable and Robust Technology with Reduced O&M Requirements

A simple, durable structure designed to withstand medium-to-high pressure differentials, combined with strong self-regulation capabilities, minimizes reliance on specialized on-site personnel.

5. Island-Mode Operation Capability

Even when disconnected from the main grid, the system can operate independently and maintain power supply, significantly improving startup reliability and commercial viability.

6. Low-Impact, Modular Design

The modular system layout minimizes environmental and visual impact, improving community acceptance and facilitating smoother stakeholder engagement.

Geothermal power represents an indispensable baseload renewable energy option for Taiwan. While regulatory, technical, site-specific, and social challenges remain, effective resource integration and the adoption of technologies tailored to local conditions can enable geothermal energy to become a cornerstone of Taiwan’s energy transition.

Taiwan does not lack geothermal resources—the real bottleneck lies in the absence of power generation equipment capable of long-term, high-efficiency, and stable operation across small-scale, distributed geothermal sites.

Learn more about ORC system ⭢
Back to List

Related Products